KBS TopcoatsKBS Diamond Finish :: ClearCoat THE WORLDS TOUGHEST CLEAR COAT- Single pack
- Tougher and harder than 2 pack clears!
- Seals both paints and metals
- Self levelling (no brush marks)
- Brush or spray application
- Permanent UV stability
- Aussie Made
| IDEAL FOR- Protecting steel and plastic bumpers paint work.
- Automotive aluminium fitting and parts.
- Aluminium wheels and fuel tanks.
- Protecting existing paint work from physical damage.
- Stopping chemical attack from acids and alkalis on existing paint work.
- Protecting paint work from all fuels. Ideal on motorcycle fuel tanks.
- Graffiti protection.
- High Temperature use like Motors and Brake Callipers
| FEATURES- Over 60% solids in single pack
- Tougher and harder than 2 pack clears!
- Seals both paints and metals
- Self levelling (no brush marks)
- Brush or spray application
- Hi Temp resistance
- Permanent UV stability
- High chemical resistance (including fuels & solvents)
- Graffiti proof
- Recoat in 1 – 2 hours
- Seals ferrous and non ferrous metals
- Break through high solids MCU Coating Technology
- Developed, made and tested in Australia
|  |
KBS BlackTop :: Chassis PaintA PERMANENT, MOISTURE-CURED, UV STABLE COATING PRIMARILY USED FOR TOPCOATING SURFACES PREVIOUSLY SEALED WITH RUSTSEAL OR ANY OTHER PAINT / PRIMER APPLICATION.BlackTop is a high performance protective coating specifically formulated to withstand dulling and fading caused by prolonged sunlight exposure. BlackTop may be used alone as a resilient coating but it will not offer the ulimate rust protection unless it is used in combination with RustSeal. For the best stop rust and ultraviolet protection, first apply RustSeal to permanently seal the surface and then topcoat with BlackTop for an incredibly tough and professional looking finish. Like RustSeal, BlackTop dries to a rock hard yet flexible coating that can be readily applied to chassis, coil springs and light weight panels. BlackTop also has high heat resistance and can be applied to almost all automotive applications except exhaust systems.  FEATURES- Single component formula
- Permanent UV stability
- No chalking or fading
- Rock hard permanent topcoat
- Flexible coating which expands & contracts
- High temp resistance
- Non-porous coating
- Superior flow and leveling
- Apply by brush or sprayer
| APPLICATIONS- Automotive & truck chassis
- Engine compartments
- Suspension components
- Floor pans & trunks
- Wheels & rims
- Wrought iron railings
- Fire escapes
|
AVAILABLE IN GLOSS AND OEM SATIN |