KBS RustSeal

KBS RustSeal is a superior one part, ready-to-use, high-solid content, rust preventive coating / rust paint / sealer, that is actually strengthened by exposure to moisture. It is impervious to road salts and most every chemical. RustSeal flows out to a beautiful, rock-hard, tough coating that is tough to chip or scratch.

250 mls - $23.50 | 500 mls - $36.00
1 Litre - $59.00 | 4 Litres - $185.00

Your Price:	$0.00

Size:

Colour:

Quantity

Description

Gloss Black	Satin Black	Off-White	Clear	Grey	Silver	Oxide Red	Guardian Green	Galvanized Steel
*Click on an image for a larger view.			Click HERE for more information on which paint colour of RustSeal you should use. Click HERE for more characteristics of the RustSeal Galvanized Steel.

RustSeal is an incredible, single-component, ready-to-use, high solids content, rust preventive coating with exceptional sealing properties. No other brand is tougher on rust! Using premium quality materials & advanced color formulations, this high tech performance coating is the present-day answer for 21st century rust protection.

RustSeal is the most permanent cost-effective solution for stopping rust & corrosion anyplace where it is a problem: home, automotive, industry, fleet, farm & more! It’s technology that’s unbeatable! Satisfaction guaranteed!

High surface tolerance for many different types of applications
Apply directly over treated rust
Single component formula
High solids content
Widest array of (8) non-porous colour formulas
Combines with atmospheric moisture to cure
Excellent surface penetration and adhesion
Forms permanent non-porous barrier against moisture and oxygen
Waterproof coating strengthened by repeated exposure to moisture
Mold and mildew resistant

High abrasion and chemical resistance
Repels fuels, oils, most acids & alkalis, and graffiti
Will not crack, flake or peel
Withstands temps up to 316°C
Brush, roll or spray application
Superior flow and leveling
Flexible coating allowing expansion and contraction
Compatible with all paint systems
Moderate UV stability
VOC compliant
Lead-Free

Automotive: chassis • floor pans • wheel wells fenders • trunks • engines • suspension parts • axles • roof drains • springs • doors • almost every part on a car except the exhaust!

Marine: engine rooms • hulls • masts • bilges • heat exchangers • decks • chain lockers • pumps • fuel tanks • boat trailers

Industrial: heavy transport • steam pipes • sealing concrete • air conditioning repair • fiberglass repair • rebar coating • steel roof • fuel & waste-water treatment tanks

Household: hand rails • support beams • lawn equipment • garage floors • pipe work • appliances • lead-based paint encapsulation

250 mls will cover approximately 2.75 m2 per coat.
500 mls will cover approximately 5.5 m2 per coat.
1 Litre will cover approximately 11 m2 per coat.
4 Litres will cover approximately 44 m2 per coat.

Click HERE for KBS RustSeal Application Information and Intructions.
Click HERE for the KBS Flow Chart.
Click HERE for KBS RustSeal Technical Data.
Click HERE for KBS RustSeal Colour Information.
Click HERE for RustSeal Chemical Resistance Guide

Click HERE to see how Howie used RustSeal to stop rust on a Ford Flat Head.
Click HERE to see how Howie used RustSeal to stop rust on some posts and the welds.
Click HERE to see how Howie used RustSeal to seal and stop rust in a gas tank.

Using RustSeal to Paint a Gas Tank - Part 1
Prepping the the outside of the tank with AquaKlean and RustBlast.

Using RustSeal to Paint a Gas Tank - Part 2
Painting the outside of the tank with RustSeal.

Review this item