KBS RustBlast

A water-based rust remover and zinc phosphate pre-priming etch.
RustBlast effectively dissolves rust, corrosion, metal oxides, and tarnishing from most metal surfaces.

RustBlast provides a gentle etch to metal surfaces and coats the metal with Zinc Phosphate, creating a surface profile ideal for optimal adhesion. RustBlast also contains KBS unique Oxygen-Block technology, which reduces the effects of flash rusting by over 80% and extends rust-free storage times to 30 days or more.

RustBlast provides the second step in permanently stopping rust and corrosion by removing the metal contamination. Unlike most conventional rust removers that have little ability to handle even the smallest amount of surface contamination, RustBlast removes minor surface contamination including finger oils, road film and light hydrocarbon deposits.

RustBlast is non-toxic, non-hazardous and biodegradable and does not require any special disposal for typical use. RustBlast is so safe to use that minimal protective covering is needed. (glasses and gloves).

Easy-to-use spray or brush application. Apply RustBlast full strength to a clean surface keeping it wet for 20-30 minutes or more and watch rust, corrosion, metal oxides, and tarnishing vanish before your eyes!

RustBlast will gently etch the surface and leave a zinc phosphate coating to ensure a strong bond with any paint.

Satisfaction guaranteed!

• Removes & neutralizes rust
• Pre-paint primer
• Provides etched surface profile for solid adhesion
• Leaves a zinc phosphate base coating
• Oxygen-Block enhanced for short term corrosion protection
• Enhances welding conductivity
• Non-flammable, no petroleum additives
• Non-corrosive
• Water-based, biodegradable

RustBlast can be used on the following surfaces: steel, cast iron, brass aluminium, galvanizing, copper, steel alloys, fibreglass and other non-metallic surfaces. RustBlast will also remove mill scale from new metal including structural steel, metal castings, and plate steel.

• steel
• cast iron
• brass
• aluminium
• galvanized
• copper
• steel alloys
• fiberglass
• other non-metallic surface
• concrete
• rust removal
• metal etching
• mill scale removal
• pre-paint surface treatment

• Click HERE for RustBlast Product Information and Instructions.
• Click HERE for the KBS Application Flow Chart.

• 4 Litres of RustBlast for 4 Litres of KBS RustSeal
• 4 Litres comes with Sprayer and Bottle
• 1 Litre of RustBlast for each Litre of KBS RustSeal
• 1 Litre of RustBlast comes with Sprayer
• 250 mls. of RustBlast for each 250 mls. of KBS RustSeal

• Click HERE to see how Howie used RustBlast to prep and etch a Ford Flat Head.
• Click HERE to see how Howie used RustBlast to prep and etch some posts and the welds.
• Click HERE to see how Howie used RustBlast to prep and etch a gas tank.