KBS RustBlast

Easy-to-use spray or brush application. Apply RustBlast full strength to a clean surface keeping it wet for 20-30 minutes or more and watch rust, corrosion, metal oxides, and tarnishing vanish before your eyes!

RustBlast will gently etch the surface and leave a zinc phosphate coating to ensure a strong bond with any paint.

Satisfaction guaranteed!

• Removes & neutralizes rust
• Pre-paint primer
• Provides etched surface profile for solid adhesion
• Leaves a zinc phosphate base coating
• Oxygen-Block enhanced for short term corrosion protection
• Enhances welding conductivity
• Non-flammable, no petroleum additives
• Non-corrosive
• Water-based, biodegradable

• steel
• cast iron
• brass
• aluminium
• galvanized
• copper
• steel alloys
• fiberglass
• other non-metallic surface
• concrete
• rust removal
• metal etching
• mill scale removal
• pre-paint surface treatment

• Click HERE for RustBlast Product Information and Instructions.
  
• Click HERE for the KBS Application Flow Chart.

• 4 Litres of RustBlast for 4 Litres of KBS RustSeal
• 4 Litres comes with Sprayer and Bottle
• 1 Litre of RustBlast for each Litre of KBS RustSeal
• 1 Litre of RustBlast comes with Sprayer
• 250 mls. of RustBlast for each 250 mls. of KBS RustSeal

• Click HERE to see how Howie used RustBlast to prep and etch a Ford Flat Head.
• Click HERE to see how Howie used RustBlast to prep and etch some posts and the welds.
• Click HERE to see how Howie used RustBlast to prep and etch a gas tank.