BlackTop :: Chassis Paint

BlackTop is a permanent, moisture-cured, UV stable coating primarily used for topcoating surfaces previously sealed with RustSeal or any other paint/primer application. BlackTop is a high performance protective coating specifically formulated to withstand dulling and fading caused by prolonged sunlight exposure. BlackTop may be used alone as a resilient coating but it will not offer the ultimate rust protection unless it is used in combination with RustSeal.

For the best stop rust & ultraviolet protection, first apply RustSeal to permanently seal the surface and then topcoat with BlackTop for an incredibly tough and professional looking finish. Like RustSeal, BlackTop dries to a rock hard yet flexible coating that can be readily applied to chassis, coil springs and light weight panels. BlackTop also has high heat resistance and can be applied to almost all automotive applications except exhaust systems. Satisfaction guaranteed!

• Single component formula
• Permanent UV stability
• No chalking or fading
• Rock hard permanent topcoat
• Flexible coating which expands & contracts
• High temp resistance
• Non-porous coating
• Superior flow and leveling
• Apply by brush or sprayer

automotive & truck chassis • engine compartments • suspension components floor pans & trunks • wheels & rims • wrought iron railings • fire escapes

• 250 mls will cover approximately 5.5 m2 per coat.
• 500 mls will cover approximately 11 m2 per coat.
• 1 Litre will cover approximately 22 m2 per coat.
• 4 Litres will cover approximately 88 m2 per coat.

• Click HERE for BlackTop Information and Instructions